|
| Sand Filter
and Pump Unit for Above Ground
Pools |
Filter Pumps
and Above Ground Swimming Pools
and Accessories
Toll
Free - 1-800-728-6009 |
|
| |
(Click on image for enlarged
view) |
| Our 75lb Sand Filter uses
special filter sand (#20 Silica Sand) to
remove dirt particles from the water.
Filter sand is loaded into the filter
tank and functions as the permanent dirt
removing media. The pool water, which
contains suspended dirt particles, is
pumped through your piping system and is
automatically directed by the patented
filter control valve to the top of the
filter tank. As the pool water is pumped
through the filter sand, dirt particles
are trapped by the sand bed, and filtered
out. The cleaned pool water is returned
from the bottom of the filter tank,
through the control valve and back to the
pool through the piping system. This
entire sequence is continuous and
automatic and provides for total
recirculation of pool water through your
filter and piping system. After a period of time, the
accumulated dirt in the filter causes a
resistance to flow, and the flow
diminishes. This means it is time to
clean (backwash) your filter. With the
control valve in the backwash position,
the water flow is automatically reversed
through the filter so that it is directed
to the bottom of the tank, up through the
sand, flushing the previously trapped
dirt and debris out the waste line. Once
the filter is backwashed (cleaned) of
dirt, the control valve is manually
resequenced to Rinse, and then Filter, to
resume normal filtering.
|
| 3,900 Gallon
per Hour Sand Filter Pump Specs
and Features |
|
- Fits
All 10, 12, 15, 18 and 24 Ft.
Diameter Intex Easy Set Pools and
Frame Set Pools, and all
above ground pools with
1.25" and 1.5" hose
connections
- Filters
out debris 20 - 25 Microns in
size and larger! (20 Microns
= 0.0007874 inches. A human hair
is approximately 50 Microns in
diameter)
- TEFC
Energy Efficient 1 HP Motor with
2 year factory warranty
- 3,900
Gallons per Hour
- 75
Lbs sand filter unit on
molded base uses #20 Silica Sand
- 6
position valve includes the
following positions:
Rinse –
Used to flush the filter media
after backwashing
Filter - Normal position
for filtering the water
Waste - Filter by-pass
that takes the water from the
pool, spa or jetted tub and sends
it out the waste port (backwash
port). Also used for lowering the
water level and may be used to
vacuum heavy debris
Closed - – Shuts off all
flow from the pump to the filter
Backwash – Cleans the
sand and sends the debris out the
waste (backwash) port
Recirculate - Water is
recirculated through the valve
by-passing the filter media.
- Cleans
easily using backflush feature
- Built
in diffuser provides high head
pressure
- Built
in thermal overload protection
protects motor from overheating
- Hair
and Lint Trap Included
with clear view lid and extra
large leaf basket
- Includes
2 each 1.50" diameter hoses
and clamps
- Fittings
will accomodate 1.25"
diameter hoses (sold
separately) used on 10 ft, 12 ft,
and 15 foot diameter pools
- 120
Volt - Double Insulated Motor
- Air
bleeder valve for trapped air
- Sediment
flush drain at bottom of lint and
hair trap
- Shipping
Weight: 65 Lbs.
|
| Model
AM-SFP1 |
MSRP:
$399.95
ONLY:
$329.95 Each
 |
|
|
Click Here
to Return to Our Tools, Accessories and
Pumps
All graphics, logos,
slogans and etc used on this website are
the property of Quality Trading Inc. or
being used with the expressed written
permission of the respective owners and
may not be used, copied, edited or
reproduced without the expressed written
permission from Quality Trading, Inc. and
the respective owners - Copyright ©
1999-2008
|
|
